Duct Cleaning in Newport, RI
Tell us about your home, and a licensed contractor who covers Newport County will get in touch.
Tell us about the job
It takes about a minute.
Step 1 of 3: Equipment
Eight months of duct work a year
Your furnace runs October through May here, and on nights that average 26°F it's pushing hot air through those ducts most of the day. That kind of steady use pulls dust and fine debris deep into the ductwork, and it settles in the bends and joints where the airflow slows down.
Newport County has seen 15 winter storms and 36 damaging wind events over the past ten years. Each time the power drops and the furnace shuts off, then kicks back on, the sudden rush of air can stir up what's settled in the ducts and send it back into the house.
- 8 months
- October through May, your furnace pushes air through your ducts
- 2 months
- July through August, your air conditioner does the same
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
NOAA nClimDiv, 1991–2020 normals
- How often should air ducts be cleaned?
- There's no fixed schedule that fits every house. If anyone in the house has allergies, or you've had renovation work that left dust behind, cleaning sooner makes sense. Homes with pets tend to need it more often too. A contractor can look at your ducts and tell you whether they're due.
- Is air duct cleaning worth it?
- It depends on what's going on in your ducts. If you can see dust building up at the vents, or you're running the furnace eight months a year like most houses here, clean ducts mean the air moving through them isn't carrying that dust into every room. It won't fix an allergy or lower a utility bill on its own, so a contractor can look at your ducts and tell you whether cleaning will actually help your situation.
- What does air duct cleaning involve?
- A contractor connects a vacuum system to your ductwork and uses brushes or air tools to knock loose dust and debris from the inside of the ducts, then pulls it all out through the vacuum. They'll also clean the supply and return vents, and check the coil and blower if those are part of the job. The furnace or air handler gets shut off during the work so nothing gets pulled back into the system while it's open.